Ok... it looks like all we need to do is add a flag to the rear bearing mount. That flag will stick out the side and trigger the switch.
I will design the part needed tonight... also, it looks like all the rest of the Sovol SV-06 parts will work just fine, including the 3DClippy filament cutter.
I worked up a little bracket to go on the 2 screws on the front left of the machine but am a tad concerned about those being intended for structural squareness.
I may try to 3m in first to prove the concept. I’ll share if it works.
Here's a replacement left rear bearing holder that also includes a "flag" to trigger the switch: https://www.tinkercad.com/things/gpr1j3oER5c-3dchameleonsovolsv06plusswitchflag
Uses all the remaining parts for the Sovol SV-06 adapters from here: https://www.tinkercad.com/things/gxoYUu1SaSA-3dchameleonwith3dclippysovolsv06
Bill
I just received my Plus today, so tonight when I get home I will look at it, but doesn't the normal SV-06 switch mount work?