Support | 3D Chameleon

To see this working, head to your live site.

Need help... check out this thread for advice from the experts.

Support

1 2 3 4 5			Recent Activity

3DClippy not cutting consistently? James	1	0	15h

PrusaSlicer only printing one layer/color at a time? Instead of two James	3	0	15h

Having some trouble getting my unit to load and unload filament (and some other bugs) nathan sasser	3	0	2d

'G1 F-2147483648' GCode being Generated doud	3	0	2d

3dClippy settings info Jordan Jackson	2	0	2d

Load unload on 1 isnt working but 2 is. Nathan Reed	8	0	3d

MK3 Tension Tuning Sliders - how to adjust woodwaker_dave	3	0	4d

3DClippy blade not cutting James	3	0	4d

I NEED SOMEONE'S HELP. Christopher Thornton	5	0	4d

Prusa slicer related Christopher Thornton	1	0	6d

Ender 3 Pro Direct Mode Extruder Motor Not Moving doud	1	0	7d

P1P coding and brackets on printables. mustangwagz	0	1	Mar 16

Don't have space for the PTFE coupler Bob Banks	8	0	Mar 15

Homing position woodwaker_dave	2	0	Mar 14

Ender 3 with microswiss direct drive Lords Fool	3	0	Mar 13

MK3 Firmware upgrade Isaiah Ester #pages	6	0	Mar 13

Recommendations for a different Y-splitter? Christopher Thornton	3	0	Mar 12

Best way to extend 6-pin extruder cable? James	1	0	Mar 12

Prusaslicer setup issue Tim Treat	2	0	Mar 11

Does 3DClippy need PTFE Tube between blade and nozzle? James	3	0	Mar 10

Recommended Esteps for 3DChameleon Advanced install? (Operating as extruder) James	1	0	Mar 10

Bolt length for mount woodwaker_dave	2	0	Mar 10

Is Wood infused filament okay to use? James	1	0	Mar 10

upgraded to BondTech BMG Extruder and Tip shapes are very stringy now? (shaped with code and smaller ptfe tube) James	3	0	Mar 09

Can I buy two kits for a printer with 2 extruders and 1 hotend for a total of 8 colors? Jack Wood	6	0	Mar 09

Tool 1 and 2 pull with less force Zachary Taylor	4	0	Mar 08

Am I missing some operation details? Tim Treat	3	0	Mar 08

Where to buy the Mk2? Mega S	2	0	Mar 08

X1C or P1P setup mustangwagz	2	0	Mar 07

error in mk3 gcode generator code? James	1	0	Mar 07

1 2 3 4 5

3DClippy not cutting consistently?

PrusaSlicer only printing one layer/color at a time? Instead of two

Having some trouble getting my unit to load and unload filament (and some other bugs)

'G1 F-2147483648' GCode being Generated

3dClippy settings info

Load unload on 1 isnt working but 2 is.

MK3 Tension Tuning Sliders - how to adjust

3DClippy blade not cutting

I NEED SOMEONE'S HELP.

Prusa slicer related

Ender 3 Pro Direct Mode Extruder Motor Not Moving

P1P coding and brackets on printables.

Don't have space for the PTFE coupler

Homing position

Ender 3 with microswiss direct drive

MK3 Firmware upgrade

Recommendations for a different Y-splitter?

Best way to extend 6-pin extruder cable?

Prusaslicer setup issue

Does 3DClippy need PTFE Tube between blade and nozzle?

Recommended Esteps for 3DChameleon Advanced install? (Operating as extruder)

Bolt length for mount

Is Wood infused filament okay to use?

upgraded to BondTech BMG Extruder and Tip shapes are very stringy now? (shaped with code and smaller ptfe tube)

Can I buy two kits for a printer with 2 extruders and 1 hotend for a total of 8 colors?

Tool 1 and 2 pull with less force

Am I missing some operation details?

Where to buy the Mk2?

X1C or P1P setup

error in mk3 gcode generator code?