So, only the latest beta of OrcaSlicer supports the Creality K1 Max.Here's a profile I just created by simply copying the 3 config settings (Start, End and Tool Change GCode) from our published PrusaSlicer profile to the default K1 Max Profile in OrcaSlicer.
I then correct the few variables that had name changes, temperature to nozzle_temperature and max_fan_speed to fan_max_speed. Once those were changed, I also turned on the purge tower and set it the way I like it.
Since the button location and the distances haven't changed, if you have it running in PrusaSlicer, this should just work, as the interaction with the extruder and the 3DChameleon don't change.
So, only the latest beta of OrcaSlicer supports the Creality K1 Max. Here's a profile I just created by simply copying the 3 config settings (Start, End and Tool Change GCode) from our published PrusaSlicer profile to the default K1 Max Profile in OrcaSlicer.
I then correct the few variables that had name changes, temperature to nozzle_temperature and max_fan_speed to fan_max_speed. Once those were changed, I also turned on the purge tower and set it the way I like it.
Since the button location and the distances haven't changed, if you have it running in PrusaSlicer, this should just work, as the interaction with the extruder and the 3DChameleon don't change.
You can download it from the K1 Printables page here: https://www.printables.com/model/653583-3dchameleon-mk3-installation-for-the-creality-k1-a/files
I might add, this NEEDS the latest beta 2.0.0 of OrcaSlicer, which you can find here: https://github.com/SoftFever/OrcaSlicer/releases/tag/v2.0.0-beta
Bill