Motors reversed?
I'm working on installing on a Creality K1. In following the PDF, during step 5, I had to unplug the wires from the board to the motors to put the cover on and as part of mounting. Somehow I've managed to dork up the wiring. Now when I'm attempting to load filament, it instead is unloading (and vice-versa). I've wired in the display screen, which is working, and so I know that the board THINKS it's supposed to be loading when it unloads and such. I'm going to describe as best I can what I have, in the hopes that someone can tell me where I'm dorked up. When looking at the BACK of the printer, the filament is loading to the left side, with the bowden tubes coming off the right. On both motors the RED wire is on the top, with the black on bottom. On the board, the Black is on top with the red on bottom. I have NOT changed any of the wiring for the motor wires, so it's not like I crossed something when rewiring, just plugged in something backwards, however looking at the pictures in the PDF, it at least seems like I have everything working (and when I tested the 3dC prior to installing it worked as intended)
Using the profiles, so should do that, however on first attempt to print, instead of loading the filament it kicked it all the way out (Fully unloaded) However now when I (manually) push switch it is loading/unloading correctly (I had homed). I need to print a few things on a time crunch so bypassing the 3dC right now, but would still appreciate any help that might be available.