Hi all,
I've managed to successfully upgrade my 3DChameleon firmware to the MK3.1, and I have also now successfully printed and installed my 3dclippy but i need a little advice on the following topics regarding the MK3 GCode that is automatically generated:-
My 3dclippy will CUT at X=220, then can be reset by sending the print head to X=0, but I've no idea, whereabouts in the automatically produced Gcode from the site as to where to put this, nor (at the moment - but I will research after posting this) the actual Gcode commands to make the two above movements.
Many thanks - looking forward to trialling and getting the colour flowing reliably, so any further advice (using an S1PRO) greatly received !! :)
Colin.
Take a look at our Ender 3 V2 code, as it does the exact thing. You can find it here in the description of this video:
https://www.youtube.com/watch?v=kpYtGQn47hU
Ignore the "Advanced Installation" portion of the gcode... just focus on the cutter movements and how I placed them.
Bill