Hi, trying to find out if anyone has made a limit switch holder for the AnkerMake m5c and where it is mounted? And what is the best way to mount the y feeder to the head? Just cut the ptfe to length?
On the AnkerMake printers, you can simply use our flat switch mount (using two sided tape) to affix it to a location on the left side of the build plate... then you also attach a small flag that engages the switch when the build plate is all the way forward. It's similar to the way the Prusa Mk3/Mk4 work, but on the other side.Steve Paxman did a great job adding one to his Ender 3 S1 using a similar technique you'll need. You can see it here: https://www.thingiverse.com/thing:5643724
On the AnkerMake printers, you can simply use our flat switch mount (using two sided tape) to affix it to a location on the left side of the build plate... then you also attach a small flag that engages the switch when the build plate is all the way forward. It's similar to the way the Prusa Mk3/Mk4 work, but on the other side. Steve Paxman did a great job adding one to his Ender 3 S1 using a similar technique you'll need. You can see it here: https://www.thingiverse.com/thing:5643724