The forum that was previously hosted on Wix is now being moved to Github. We will maintain this for future information only and posting or editing is being disabled.
Ok... it looks like all we need to do is add a flag to the rear bearing mount. That flag will stick out the side and trigger the switch.
I will design the part needed tonight... also, it looks like all the rest of the Sovol SV-06 parts will work just fine, including the 3DClippy filament cutter.
I worked up a little bracket to go on the 2 screws on the front left of the machine but am a tad concerned about those being intended for structural squareness.
I may try to 3m in first to prove the concept. I’ll share if it works.
Here's a replacement left rear bearing holder that also includes a "flag" to trigger the switch: https://www.tinkercad.com/things/gpr1j3oER5c-3dchameleonsovolsv06plusswitchflag
Uses all the remaining parts for the Sovol SV-06 adapters from here: https://www.tinkercad.com/things/gxoYUu1SaSA-3dchameleonwith3dclippysovolsv06
Bill
I just received my Plus today, so tonight when I get home I will look at it, but doesn't the normal SV-06 switch mount work?