The forum that was previously hosted on Wix is now being moved to Github. We will maintain this for future information only and posting or editing is being disabled.
Hi, trying to find out if anyone has made a limit switch holder for the AnkerMake m5c and where it is mounted? And what is the best way to mount the y feeder to the head? Just cut the ptfe to length?
On the AnkerMake printers, you can simply use our flat switch mount (using two sided tape) to affix it to a location on the left side of the build plate... then you also attach a small flag that engages the switch when the build plate is all the way forward. It's similar to the way the Prusa Mk3/Mk4 work, but on the other side.Steve Paxman did a great job adding one to his Ender 3 S1 using a similar technique you'll need. You can see it here: https://www.thingiverse.com/thing:5643724
On the AnkerMake printers, you can simply use our flat switch mount (using two sided tape) to affix it to a location on the left side of the build plate... then you also attach a small flag that engages the switch when the build plate is all the way forward. It's similar to the way the Prusa Mk3/Mk4 work, but on the other side. Steve Paxman did a great job adding one to his Ender 3 S1 using a similar technique you'll need. You can see it here: https://www.thingiverse.com/thing:5643724