Creality K1?

ok so place the chameleon gcode for switching colors in

without the tip shaping gcodes, let the slicer handle that.

it wil look something like this,

{if previous_extruder>-1}

{if next_extruder!=previous_extruder}

SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0

SET_FILAMENT_SENSOR SENSOR=filament_sensor_2 ENABLE=0

; Creality K1 3D Chameleon Mk3 Mode 3 Tool Change GCode for PrusaSlicer

; - 3D Chameleon Mk3 Tool T{next_extruder} -

;begin switch from extruder {previous_extruder} to extruder #{next_extruder}

; unload extruder {previous_extruder}

G92 E0

G0 X210 Y217 F10000 ; <<----- EDIT THIS LINE TO SET THE INITIAL LOCATION OF THE BUTTON

G91 ; move to relative mode

M83

; select next extruder #{next_extruder}

G0 Y3 F2000

{if next_extruder==0}

G4 P550

{endif}

{if next_extruder==1}

G4 P1000

{endif}

{if next_extruder==2}

G4 P1500

{endif}

{if next_extruder==3}

G4 P2000

{endif}

G0 Y-3 F10000

G4 P400

; continue unloading

G0 Y3 F2000

G4 P5000

G0 Y-3 F2400

G4 P400

;load new filament

G0 Y3 F2000 ;

G4 P6000

G0 e10 f1000

G0 Y-3 F2400

G92 E0

SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=1

SET_FILAMENT_SENSOR SENSOR=filament_sensor_2 ENABLE=1

G90 ; move to absolute mode

M83

{endif}

{endif}