what do i do to fix this dont have the tools to swap them now i know why i cant get this to work

if thats the case mine is backwards for both extruder and selector

thought it was working but filament is running the wrong direction any ideas please help this dumbshit

sorry about the rant i have figured out most of it but cant figure out how to tell it what color is what keeps giving me this // {"code":"key61, "msg":"Unknown command:T0", "values": ["T0"]}  // {"code":"key61, "msg":"Unknown command:T1", "values": ["T1"]}  // {"code":"key61, "msg":"Unknown command:T2", "values": ["T2"]}  // {"code":"key61, "msg":"Unknown command:T3", "values": ["T3"]} I am a persistant SOB and will get this hope for some help can only get to 170 on filament cooling without errors but seems to work it will change colors but dont know what its changing to also may need to change Dwell times not sure thank you for any help you are willing to give

have a good part of it figured out just a little more to go

Ok so been figuring this out and now have it working sort of on Orca just need to figure out how to tell it which extruder it is keep getting // {"code":"key61, "msg":"Unknown command:T0", "values": ["T0"]}  // {"code":"key61, "msg":"Unknown command:T1", "values": ["T1"]} // {"code":"key61, "msg":"Unknown command:T2", "values": ["T2"]} // {"code":"key61, "msg":"Unknown command:T3", "values": ["T3"]} figured out cant let extruder get below 170 or get low temp code no way to do cold extrude as of yet but 170 seems to be ok with PLA it will change colors but it has no idea as to what color it is going to any ideas Yes I am A persistant SOB and will not give up I know it is possible to get this working maybe more hitting the gcode differences and get it figured out unless some one has an idea Thank You for any help

tried it and its not as easy to use guess i just spent money i shouldnt have and will eccourage others not to do the same

not going there tried it it sucks

this is not the best way to get return buyers Bill I am needing help on your product and you respond like this HELLO you say it will work even with ofsprings of Prusa so a little help would be appreciated had several other people wanting to buy this but as of now not happening If and when i get it to work may happen but that response was not a customer satisfyer sorry for the baloon pop but get off your high horse and give a little help thats all we ask no need to act like you did help is all i need not what i got you know how to do this you made the damn thing all we want is help thank you

I did remove M600 probably need that there still not sure

I now get this code but it don't stop printing not sure how to fix it have tried to figure out from the gcode i downloaded for klipper but nothing makes sense {"code":"key61, "msg":"Unknown command:T0", "values": ["T0"]} I know this is for color change but what to do to fix it not sure

did you get yours yet and have you figured it out im sure the temp problem is fixed since the code is in the slicer but it wouldnt load to the extruder either may be the part i made to add the ptfe tube connector to the extruder wish there was an easy way to get this done $200.00 may not seem like much for some but it is for me I have now been figuring out Gcode and have a little more of an idea but still not a pro by any means this code is a bit different from computer code so im a bit lost at times used to be able back in the day program an apple computer I know you are all asking wtf is an apple computer well that is what i started on lol and have built several other computers since so im not new to the computer world I noticed that Orca dont let you add extruders how do you change that any help is appreciated if i have to goto Prusa i will but would rather stay with Orca

thank you that may be that problem and may fix it but also had problem getting it to actually load into the extruder thought about just using it as extruder but how would it know how hard to push and when to pull back that confuses me as well

there was several that came up one said im thinking m104 out of range i have been 3d printing for about 2 months and have some computer skills but not sure how to set this up and i tried prusa didnt like it would rather stick with what i know

Im using Orca slicer by the way i know that makes the g code different from prusa but thats what i started with and would like to continue using it if at all possible

Has anyone set up the 3D Chamelon on an Ender 5 S1 if so I need help with g code and what did if anything you do for filament cutter if any one can help with g code would appreciate it Im new to 3d printing and need all the help I can get