Odd occurrence on tool change layers
I keep having something odd happen on tool change layers where it seems like it's got a clog or something causing it to partially miss a layer. It happens when I do infield first and it happens when I do walls first. It only occurs within layers that have tool changes. Has anybody seen this or know how to fix this?
72 Views
Actually, in his case, he had a temperature setting that was incorrect... and his issue was resolved by correcting the tip shaping (temp setting.) If you're seeing the same thing, check the temperatures of the filaments and make sure your tips look correct and don't have strings or blobs on them. Follow our FAQ #10 guidance on correcting it. One other option is to totally eliminate the need for tuning the filament and instead use the 3DClippy to cut the tips off. This is a new design that cuts off the tip and leaves it in the hot end, which will then get purged on the next filament load. Again, anything you can post to help us diagnose it will help... gcode, 3mf profile and pictures of the tips would all help.