T0 not connecting
I need help with extruder. I'm using the 3dChameleon in direct drive mode and my T0 is not properly extruding when I have it selected.
I have tuned the other extruders with the replacedment spacers and they work great. But the T0 is not engaging properly.
When I open the 3DC and have T2 selected, the part with the bearings is stuck and pinching against the bearing real tight which is great.
But when I select T0 i can lift the part off very easily and the bearing is not even touched by the extruder.
I can not use a different tensioner as the bearing is pressed into the black extruder part.
I feel like the camshaft is not working properly on the T0 and T2. Is there something I ccan do about this?
39 Views
Hi Bill, I already have mailed you while my post was stuck for approval and you send me the new parts which work a bit better. Thanks!
I replied to you with some videos and pictures about my extruder as I feel the camshaft is off. I'm close to having this solved and I'm sure it will be file after some tinkering and modifying but that's the hobby :)