Ender 5 plus trigger switch position
Im wondering where the best place to put the trigger switch is on the ender 5 setup. I have it mocked up in place in the front right corner. im trying to place it off the build area to keep as much build surface as possible. This setup would keep is so the only way the button could be triggered is intentionally. My issue is this, the position of the switch would be a negative coordinate. But when i tried to set minimum for that stepper motor with Sonic pad it wont let me set negative values. I wondering if i can make my max bed size 360 or so on that axis in order to move the "0" point farther away? or is there a better place to mount the sensor? im not 100 percent sure on the best place to mount it without it being triggered accidently during bed mesh or printing. Thanks so much. Ive got pretty much everything else ready to test at this point so hopefully this can get me going this weekend
I'm confused as to what you're talking about... the Sprite Extruder is a hotend as well, so there shouldn't be any long distances at all... The only distance you need to deal with is the distance between the Sprite's drive gears and the nozzle tip... which is only about 65mm or so.
The distance should never involve the Y adapter... that's the timing one, which you have as 30.6 seconds.