Loading Filament
Hey everyone, I don't know what I'm doing wrong but I cannot, for the life of me, get my filament loaded. Can someone explain to me how to get the filament loaded?
Everytime I've been trying something happens completely different then I expect to. Sometimes a random filament loads then unloads, and sometimes a random one unloads then loads. Any help is greatly appreciated 🙂
147 Views
Ok... here are the step by steps to load it, and optionally test it all. Can you tell me which step it is having issues with?
Loading and validation checkout
--------------
1) Switch to Mode 3 - press the switch for 10 pulses
until the unit responds with 3 short pulses.
2) Press switch and let go after 7 vibrations. The 3DChameleon will home the selector (and make a small grinding noise)
3) Insert filaments into slots T1, T2 and T3 until it reaches 1" before the Y adapter.
4) Press switch and let go after 1 vibration.
5) Insert filament into slot T0 and press the button.
6) The 3DChameleon will start driving filament T0, hold the button until it reaches 1" before the Y adapter.
To test it,
7) Cycle through 1, 2, 3 and 4 pulse count switch press tounload and load the various filaments... for each filament press the button a second time to unload the previous filament and a third time to load the new filament.
Bill