Here's a beta of the reversed servo firmware. I'll be rolling this into the main firmware as an optional setting, but at this time it needs to be separate as I don't have all the other features finished that will also need the settings code, so I can't release it in full just yet.
Bill I just got my 3DC back and hooked it all last night. I assume it has the MK4 firmware since the OLED says so. It looks like the servo is actuating in the wrong direction now though. Should I reflash firmware?
Yep, more than likely. There is a new firmware zip file on the Getting Started forum that contains all 4 variations of the firmware... 180 Degree and 270 Degree Normal and Reversed.
We only ship with 180 Normal. So if you need to swap the direction, use the 180 Reversed version.
I have an updated firmware that I added a flag to allow it to reverse the directions. I got tied up yesterday and couldn't post it, but I will do that tonight.
Here's a beta of the reversed servo firmware. I'll be rolling this into the main firmware as an optional setting, but at this time it needs to be separate as I don't have all the other features finished that will also need the settings code, so I can't release it in full just yet.
Bill
I have an updated firmware that I added a flag to allow it to reverse the directions. I got tied up yesterday and couldn't post it, but I will do that tonight.
Bill