I have done a little searching but cannot find any pictures of the 3dChameleon MK2 or MK1 installed with the RepKord Box.
Does anyone know how this integrates or works? If so, I's be very grateful. I have a RepKord specifically for this MK2 kit and don't want to re-create the wheel with some over-the-top connection.
Thanks in Advance
There is nothing needed to integrate them... simply connect the filament tubes from the 3D Chameleon into the Repbox. The Repbox will grab a hold of the PTFE tubes and hold them into place. I typically have mine mounted on the shelf above the printer.