When I was trying to set it up, I accidentally cut the tube too short. I took it apart and put new tube in there, but now the selector is in the wrong position. I was wondering if anyone could send a picture of the top view of the default position the selector motor should be in once homed.
Many thanks,
Braxton
Thanks, everything was working as it should, I just needed to know the selector position
In this picture, you can see the arrow on the right, that's where the slot in the selector cam should be aligned to when you home it. If it's not doing that, make sure you've connected the wires to the proper motor. When you press the button, the selector motor should vibrate, not the extruder motor.
Bill